Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Premium Audio/Visual/Navigation (AVN) System) >> Front LCD monitor >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Take care not to scratch the crash pad and related parts.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad side garnish assembly.

    (Refer to Body - "CRASH PAD SIDE GARNISH ASSEMBLY ")

    CAUTION: In case of working on the non-gloss timber trimming, special care shall be given to the following.
    • - When removing with the screwdriver or remover, wrap the protective tape on the tools.
    • - Be careful not to damage parts because the non-gloss timber trim is easily scratched or picked.
    • - Be careful to store and handle the crash pad when removing/installing because lubricant and oil can leave a stain on the trim.
  3. Remove the fascia panel monitor.

    (Refer to Body - "CRASH PAD MAIN LOWER ASSEMBLY ")

  4. Remove the front LCD monitor after loosening the mounting screws.
G11341199Courtesy of
scientia non olet · About Mike's Workshop Manuals