Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 411 (Electronic Stability Program (Esp) System) >> Electronic Stability Program >> Troubleshooting >> Communication with GDS is Not Possible. (Communication with Any System is Not Possible) >> Inspection Procedures

Inspection Procedures

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.

Check for Continuity in the CAN Line 

  1. Disconnect the connector from the ABS control module.
  2. Check for continuity between terminals 26, 14 of the ABS control module connector and 3, 11 of the data link connector.
  3. Is there continuity?

    YES 

    • Check the power source of ABS control module.

    NO 

    • Remedy an open in the wire.
scientia non olet · About Mike's Workshop Manuals