Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 339 (Blind Spot Detection System) >> Blind Spot Detection Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the crash pad lower switch (A) after loosening the mounting screws.
    Fig 1: Locating Crash Pad Lower Switch
    G11858549Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the connector (A) from the crash pad lower switch.
Fig 2: Disconnecting Connector From Crash Pad Lower Switch
G11858550Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals