Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 271 (Surround View Monitoring (SVM) System) >> Surround View Monitoring Switch >> Repair Procedures >> Removal >> Floor Console Switch

Floor Console Switch

WARNING: This page is about a different car, the 2016 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Negative (-) Battery Terminal.
  2. Remove the Floor Console Upper Cover.

    (Refer to Body - "FLOOR CONSOLE ASSEMBLY ")

  3. Disconnect the Floor Console Switch Connector (A).
    Fig 1: Disconnecting Floor Console Switch Connector
    G11863321Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the SVM Switch (A) after loosening Mounting Screws.
Fig 2: Removing SVM Switch Mounting Screws
G11863322Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals