Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control Diagnosis >> DTC C2243-08: CAN Signal Error-TCM Shift Position >> DTC Inspection >> GDS Data Analysis

GDS Data Analysis

  1. Connect GDS to Data Link Connector (DLC).
  2. Engine running "ON" condition.
  3. Change the position of shift lever.
  4. Monitor the "Shift Lever Position" parameter on the "Current Data" menu of the GDS.
  5. Whenever you change the shift lever position, is the parameter changed?

    YES 

    • Fault is intermittent caused by poor connection. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair " procedure.

    NO 

    • Go to next step.
scientia non olet · About Mike's Workshop Manuals