Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 3.3T Premium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Control System - 3.8L) >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Install the component with the specified torques.
  • Note that internal damage may occur if the component drops. If the component drops, inspect it before installation.
CAUTION:
  • Insert the sensor in the installation hole and be careful not to damage during installation.
  1. To install, reverse the removal procedure.

    Manifold absolute pressure sensor Installation bolt: 

    3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

scientia non olet · About Mike's Workshop Manuals