Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 3.3T Premium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Airbag Modules And Clock Spring) >> Knee Airbag (KAB) Module >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the Mounting nuts (A).
    G11340189Courtesy of
  4. Remove the screws (A) and Connector (B).
    G11340190Courtesy of
  5. Push the clip (A), you are removing the knee air bag module.
G11340191Courtesy of