Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 3.3T Premium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Automatic Transmission Control System) >> Inhibitor Switch >> Repair Procedures >> Inspection >> Power Circuit Inspection

Power Circuit Inspection

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Inhibitor switch connector.
  2. Turn the ignition key ON and the engine OFF.
  3. Measure voltage between supplied power and ground at inhibitor circuit.

    Specification:  Approx. 12V

scientia non olet · About Mike's Workshop Manuals