Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 3.3T Premium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 411 (Electronic Stability Program (Esp) System) >> Yaw-Rate and G Sensor >> Repair Procedures >> G-Sensor Calibration

G-Sensor Calibration

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition "OFF", connect GDS.
  2. Ignition "ON" & Engine "OFF" select vehicle name and ESP system.
  3. Perform G-sensor calibration in vehicle S/W Management menu of the GDS.
  4. Perform the "G-Sensor Calibration " procedure with GDS.
    Fig 1: Screen Display - Performing G-Sensor Calibration Procedure
    G11800891Courtesy of KIA MOTORS AMERICA, INC.
  5. Complete the "G-Sensor Calibration" procedure.
scientia non olet · About Mike's Workshop Manuals