Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 3.3T Premium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 316 (Engine Control System) >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2016 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the VIS valve connector.
  3. Measure resistance between the VIS valve terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  30.0 ~ 35.0 [20°C (68°F)]

scientia non olet · About Mike's Workshop Manuals