Repair Procedures: Removal

WARNING: This page is about a different car, the 2016 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

[Bank 1]

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the intake manifold.
(Refer to Engine Mechanical System - "INTAKE MANIFOLD ")
Remove the delivery pipe.
(Refer to Fuel Delivery System - "DELIVERY PIPE ")
Remove the mounting bolt (A), and then remove the sensor from the cylinder block.

Fig 1: Locating Mounting Bolt - Bank 1

Courtesy of KIA MOTORS AMERICA, INC.

[Bank 2]

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the intake manifold.
(Refer to Engine Mechanical System - "INTAKE MANIFOLD ")
Remove the delivery pipe.
(Refer to Fuel Delivery System - "DELIVERY PIPE ")
Remove the mounting bolt (A), and then remove the sensor from the cylinder block.

Fig 2: Locating Mounting Bolt - Bank 2

Courtesy of KIA MOTORS AMERICA, INC.