Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 3.3T Premium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Cluster Module Diagnosis) >> DTC B1000-51: EOL Not Programmed >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
Item Conditions for setting DTC Possible Cause
DTC Strategy
  • Check CAN communication
  1. Check option information and performance of cluster
  2. Perform cluster coding procedure
  3. Check SCC/EPB/ESC/TPMS/LDWS/ECS/ABS/SRSCM/PSB/AFLS/EHPS
  4. Check CAN line
  5. Check Cluster
Enable Conditions
  • IG key "ON"
Case1 Threshold Value
  • Not performed cluster coding
DTC Erasing Time
  • Performed correct coding procedure
Case2 Threshold Value
  • Failed initial coding performance
DTC Erasing Time
  • Erased DTC after solved problem
Diagnostic Time
  • 2, 000ms
scientia non olet · About Mike's Workshop Manuals