Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G80 5.0 Ultimate >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 3.8L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the air intake hose.

    (Refer to INTAKE & EXHAUST SYSTEM - 3.8L Engine Mechanical System )

  3. Disconnect the ETC module connector (A).
    G11354999Courtesy of
  4. Disconnect the coolant hose (A).
    G11355000Courtesy of
    G11355001Courtesy of
  5. Remove the ETC module (B) from the engine after loosening the installation bolt (A).
G11355002Courtesy of
scientia non olet · About Mike's Workshop Manuals