Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G80 5.0 Ultimate >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System - 5.0L >> Sub Fuel Sender >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the sub fuel sender.
  3. Using an ohmmeter, measure the resistance between terminals 1 and 2 of sender connector (A) at each float level.
    G11336737Courtesy of
    Pin No. Description
    1 Fuel sender signal
    2 Fuel sender ground
  4. Check that the resistance is within the specification.
Position Resistance (Ω) Capacity (l  )
1/2 104 ~ 106 38
H 3 ~ 5 73
scientia non olet · About Mike's Workshop Manuals