Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (Smart Cruise Control System - 5.0L) >> Smart Cruise Control Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the air-bag module from the steering wheel.

    (Refer to Restraint - " "DRIVER AIRBAG (DAB) MODULE AND CHECK SPRING )

  3. Remove the cover (A) after loosening the screw.
    G11335402Courtesy of
  4. Disconnect the cruise control switch connector.
  5. Remove the cruise control switch mounting screws (A).
    G11335403Courtesy of
  6. Remove the cruise control switch (A).
    G11335404Courtesy of
    G11335405Courtesy of
scientia non olet · About Mike's Workshop Manuals