[Measuring Resistance]
WARNING: This page is about a different variant/trim than selected.
- Disconnect the cruise control switch connector from the control switch.
- Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
Function switch Terminal Resistance (kΩ) SET - 5 - 6 0.31 ~ 0.35 RES + 5 - 6 0.52 ~ 0.58 SCC 5 - 6 2.42 ~ 2.67 CANCEL 5 - 6 0.17 ~ 0.19 CRUISE 5 - 6 0.84 ~ 0.92 - If not within specification, replace switch.