Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G80 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Fuel Delivery System - 5.0L) >> Fuel Pressure sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Folding the rear seat cushion.
  3. Remove the fuel pump service cover (A) after loosening the screws.
    G11336773Courtesy of
  4. Disconnect the fuel pressure sensor connector (A).
  5. Remove the fuel pressure sensor fixing pin (B).
  6. Remove the fuel pressure sensor (C) from the fuel pump.
G11336774Courtesy of
scientia non olet · About Mike's Workshop Manuals