Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G80 3.8, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System >> Blind Spot Detection Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to CRASH PAD Body )

  3. Remove the blind spot detection (BSD) switch (A) after disengaging the mounting clip.
G11342778Courtesy of
G11342779Courtesy of
scientia non olet · About Mike's Workshop Manuals