Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G80 3.8, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Smart Cruise Control System - 3.8L >> Smart Cruise Control Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the air-bag module from the steering wheel.

    (Refer to DRIVER AIRBAG (DAB) MODULE AND CHECK SPRING Restraint )

  3. Remove the cover (A) after loosening the screw.
    G11354910Courtesy of
  4. Disconnect the cruise control switch connector.
  5. Remove the cruise control switch mounting screws (A).
    G11354911Courtesy of
  6. Remove the cruise control switch (A).
G11354912Courtesy of
G11354913Courtesy of
scientia non olet · About Mike's Workshop Manuals