Removal Procedure

Disable the SIR system. SIR Disabling and Enabling
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Release the retaining tab.
Steering Wheel Airbag Access Hole Cover - Left Side and Right Side (1) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Airbag Bolt (1) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Use a flat bladed plastic trim tool to separate the steering wheel airbag plate (1) from the steering wheel horn plate (2).
Courtesy of GENERAL MOTORS COMPANY

Pull the steering wheel airbag away from the steering wheel to expose the electrical connections.
Disconnect the electrical connectors.
Steering Wheel Airbag (1) - Remove
Properly dispose of the airbag module. Inflatable Restraint Module Handling and Scrapping
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Bolt (1) - Remove
Disconnect the electrical connector. (2)
Courtesy of GENERAL MOTORS COMPANY

Wiggle the steering wheel until the wheel disengages completely.
Steering Wheel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Spoke Cover Bolt (1) - Remove [4x]
Cruise Control Switch Bolt (2) - Remove [2x]
Steering Wheel Shroud (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Spoke Cover Bolt (1) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector.
Release the retainers with a suitable plastic trim tool.
Steering Wheel Trim Spoke Cover Applique Asm (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Cruise Control Switch Bolt (1) - Remove [2x]
Release the retainers with a suitable plastic trim tool.
Cruise Control Switch (2) - Remove