Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Body Control Module Bracket (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Body Control Module Bracket Nut (2) - Install and tighten [3x] - Fastener Specifications
Body Control Module Bracket Bolt (1) - Install and tighten - Fastener Specifications
Connect the wiring harness retainers as necessary.
Courtesy of GENERAL MOTORS COMPANY

Serial Data Gateway Bracket (1) - Install
Secure the retaining tabs.
Connect the wiring harness retainers as necessary.
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Multifunction Power Supply Converter (1) - Install
Ensure that the retaining tabs are fully secured.
Courtesy of GENERAL MOTORS COMPANY

Body Control Module Shield (1) - Install
Secure the retaining tabs.
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Extension Panel - Left Side (2) - Install
Front Floor Console Extension Panel Bolt (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Bolt Access Hole Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Air Conditioning Evaporator and Blower Module Drain Hose (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Body Control Module (1) - Install
Secure the retaining tabs.
Connect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Serial Data Gateway Module (1) - Install
Secure the retaining tabs.
Connect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Instrument Panel Wiring Harness Junction Block (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Extension Panel - Right Side (2) - Install
Front Floor Console Extension Panel Bolt (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Floor Console Front Cover (1) - Install