Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2023 >> Canyon AT4 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.7L - Repair Instructions >> Repair Instructions >> Intake Air Duct Replacement >> Removal Procedure

Removal Procedure

  1. GM6164817Courtesy of GENERAL MOTORS COMPANY

    With the aid of an assistant, remove the fascia. (1) Front Bumper Fascia Removal and Installation (without SD0) , or Front Bumper Fascia Removal and Installation (SD0)

  2. GM6141507Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connector. (1)

  3. GM6141014Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Shutter Bolt (1) - Remove [2x]

  4. GM6141023Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Shutter Bolt (1) - Remove [8x]

  5. GM6165917Courtesy of GENERAL MOTORS COMPANY

    Pull the lower edge of the front bumper shutter outward and then pull down to clear the upper bolt tabs.

  6. Front Bumper Shutter (1) - Remove
  7. GM6158007Courtesy of GENERAL MOTORS COMPANY

    Intake Air Duct Retainer (1) - Remove [2x]

  8. Intake Air Duct (2) - Remove
scientia non olet · About Mike's Workshop Manuals