Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2023 >> Acadia AT4 >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Secondary And Configurable Customer Controls >> Diagnostic Information and Procedures >> Drive Mode Switch Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.

    Verify the DTC does not set.

    • If the DTC sets 

      Refer to: Circuit/System Testing

    • Go to next step: If the DTC is not set 
  2. All OK.
scientia non olet · About Mike's Workshop Manuals