Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2021 >> Yukon AT4 >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Vehicle Access - Repair Instructions >> Repair Instructions >> Rear Closure Hands Free Module Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. GM5568823Courtesy of GENERAL MOTORS COMPANY

    Rear Closure Hands Free Module Bolt (1) - Remove

  3. Rear Closure Hands Free Module (2) - Remove
  4. Disconnect all electrical connectors.
scientia non olet · About Mike's Workshop Manuals