Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2021 >> Terrain SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Driver Assistance Systems) >> Diagnostic Information And Procedures >> DTC B356A (GMC) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Operate the component:Lane Departure Warning Switch - Cycle On and Off

    Verify the scan tool parameter:Lane Departure Warning Switch Status=Active/Inactive - The value should change when selecting the different switch positions.

    • If not the specified values 

      Refer to: Circuit/System Testing

    • Go to next step: If the specified values 
  3. All OK.
scientia non olet · About Mike's Workshop Manuals