Installation Procedure
WARNING: This page is about a different car, the 2020 GMC Terrain and 2020 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Battery Tray (3) - Install
- Battery Tray Mounting Bolt (2) - Install and tighten [3x] 22 N.m (16 lb ft)
- Battery Tray Mounting Nut (1) - Install and tighten 22 N.m (16 lb ft)
Retainer (1) - Engage [4x]
- Install the engine control module bracket. Engine Control Module Bracket Replacement
Engine Wiring Harness Junction Block (2) - Install
- Engine Wiring Harness Fuse Block Bracket Bolt (1) - Install and tighten [2x] 22 N.m (16 lb ft)
Battery (1) - Install - Battery Replacement
CAUTION:
Refer to Fastener Caution