Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2021 >> Terrain SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Power Transfer Unit AAM) >> Repair Instructions - On Vehicle >> Power Transfer Unit Case Fluid Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2021 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4288856Courtesy of GENERAL MOTORS COMPANY

    Install drain plug (2) and seal and tighten to 39 N.m (29 lb-ft).

  2. Fill the transfer case to the bottom of the fill plug hole with the recommended fluid. Refer to:

    Adhesives, Fluids, Lubricants, and Sealers , or

    Approximate Fluid Capacities .

  3. Install fill plug (1) and seal and tighten to 39 N.m (29 lb-ft).
  4. Inspect the cross member to ensure that no oil has drained into the cross member cavity. Clean the cross member if necessary.