Component Testing

Relay Test

1. Ignition/Vehicle - Off
2. Remove the component: KR5 Rear Defogger Relay
3. Test for 70 to 110 Ω between the test points: Component terminal 85 & Component terminal 86
   • If not between 70 and 110 Ω 

     Replace the component: KR5 Rear Defogger Relay

   • Go to next step: If between 70 and 110 Ω 
4. Test for infinite resistance between the test points:
   • Component terminal 30 & 85
   • Component terminal 30 & 86
   • Component terminal 30 & 87
   • Component terminal 85 & 87
   • If less than infinite resistance 

     Replace the component: KR5 Rear Defogger Relay

   • Go to next step: If infinite resistance 
5. Connect a 3 A fused jumper wire between the test points: Component terminal 86 & 12 V

   Connect a jumper wire between the test points: Component terminal 85 & Ground

6. Test for less than 2 Ω between the test points: Component terminal 30 & Component terminal 87
   • If 2 Ω or greater 

     Replace the component: KR5 Rear Defogger Relay

   • Go to next step: If less than 2 Ω 
7. All OK.