Circuit/System Verification

Ignition - On / Vehicle - In Service Mode
Verify the scan tool parameter: Driver Door Lock Switch = Inactive
- If not the specified state
  Refer to: Circuit/System Testing - Test 1
- Go to next step: If the specified state
Operate the component: S13D Door Lock Switch - Driver - Lock Switch & Unlock Switch
Verify the scan tool parameter: Driver Door Lock Switch = Lock & Unlock
- If not the specified state
  Refer to: Circuit/System Testing - Test 1
- Go to next step: If the specified state
Verify the scan tool parameter: Passenger Door Lock Switch = Inactive
- If not the specified state
  Refer to: Circuit/System Testing - Test 1
- Go to next step: If the specified state
Operate the component: S13P Door Lock Switch - Passenger - Lock Switch & Unlock Switch
Verify the scan tool parameter: Passenger Door Lock Switch = Lock & Unlock
- If not the specified state
  Refer to: Circuit/System Testing - Test 1
- Go to next step: If the specified state
Operate the component: S13D Door Lock Switch - Driver - Lock Switch & Unlock Switch
Verify the component works as specified:
- A23D Door Latch Assembly - Driver = Lock & Unlock
- A23LR Door Latch Assembly - Left Rear = Lock & Unlock
- A23P Door Latch Assembly - Passenger = Lock & Unlock
- A23RR Door Latch Assembly - Right Rear = Lock & Unlock
- { A23D Door Latch Assembly - Driver } If the component does not activate
  Refer to: Circuit/System Testing - Test 2
- { A23LR Door Latch Assembly - Left Rear } If the component does not activate
  Refer to: Circuit/System Testing - Test 3
- { A23P Door Latch Assembly - Passenger } If the component does not activate
  Refer to: Circuit/System Testing - Test 3
- { A23RR Door Latch Assembly - Right Rear } If the component does not activate
  Refer to: Circuit/System Testing - Test 3
- If none of the components operate
  Refer to: Circuit/System Testing - Test 4
- Go to next step: If all functions work properly
All OK.