Installation Procedure
- Generator Splash Shield (3) - Install
- Generator Nut (2) - Install and tighten 22 N.m (16 lb ft)
- Generator Bolt (1) - Install and tighten 22 N.m (16 lb ft)
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Generator Bolt (1) - Install and tighten 22 N.m (16 lb ft)
- Lower the vehicle.
- Air Cleaner Assembly (1) - Install - Air Cleaner Assembly Replacement
- Air Cleaner Outlet Front Duct (2) - Install - Air Cleaner Outlet Front Duct Replacement
- Connect the negative battery cable. Battery Negative Cable Disconnection and Connection
CAUTION:
Refer to Fastener Caution