Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2019 >> Terrain SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Cruise Control System) >> Diagnostic Information And Procedures >> DTC P0575: Cruise Control Switch Signal Message Counter Incorrect >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 GMC Terrain and 2018 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that no DTCs are set, except DTC P0575.
    • Go to next step: If only DTC P0575 is set 
  2. Replace the K9 Body Control Module.
  3. Verify DTC P0575 does not set when operating the vehicle within the Conditions for Running the DTC.
    • If the DTC sets 

      Replace the K20 Engine Control Module.

    • Go to next step: If the DTC does not set 
  4. All OK.
scientia non olet · About Mike's Workshop Manuals