Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2019 >> Terrain SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Cooling System) >> Diagnostic Information And Procedures >> Engine Fails To Reach Normal Operating Temperature

Engine Fails To Reach Normal Operating Temperature

WARNING: This page is about a different car, the 2018 GMC Terrain and 2018 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Step Action Yes No
1
  1. Ensure that the cooling system is full.
  2. Allow the engine to cool.
  3. Start the engine.
  4. Turn the air conditioning system off.
  5. Inspect the engine cooling fan(s).
Is the electric cooling fan on?		 Go to Step 2  Go to Step 3 
2
  1. Diagnose and repair the cooling fan system. Refer to Cooling Fan Inoperative .
  2. Verify the customer complaint.
Does the engine still fail to reach normal operating temperature?		 Go to Step 3  System OK
3 Install the Scan Tool to the DLC. Compare the Scan Tool coolant temperature reading to the I/P cluster coolant temperature.
Is the I/P cluster coolant temperature close to the reading on the Scan Tool?		 Go to Step 5  Go to Step 4 
4
  1. Diagnose and repair the coolant temperature gauge system.
  2. Verify the customer complaint.
Does the engine still fail to reach normal operating temperature?		 Go to Step 5  System OK
5 Inspect the thermostat for correct operation. Refer to Thermostat Diagnosis .
Is the thermostat operating correctly?		 System OK Go to Step 6 
6
  1. Replace the thermostat housing. Refer to Engine Coolant Thermostat Housing Replacement (LYX) Engine Coolant Thermostat Housing Replacement (LTG) .
  2. Verify the customer complaint.
Does the engine still fail to reach normal operating temperature?		 Go to Step 1  System OK
scientia non olet · About Mike's Workshop Manuals