Installation Procedure
- Radio Function Switch (2) - Install
- Radio Control Bolt (1) - Install and tighten [2x] 2.5 N.m (22 lb in)CAUTION:
- Instrument Panel Radio Front Trim Plate (1) - Install
- Radio Control Bolt (1) - Install and tighten [7x] 2.5 N.m (22 lb in)
- Connect the electrical connectors.
- Instrument Panel Radio Front And Rear Trim Plate Assembly (1) - Install
- Radio Control Bolt (1) - Install and tighten [7x] 2.5 N.m (22 lb in)
- Instrument Panel Trim Pad - Right Side (1) - Install - Instrument Panel Trim Pad Replacement - Right Side (Terrain)
- Instrument Panel Center Trim Plate Applique (1, 2) - Install - Instrument Panel Center Trim Plate Applique Replacement (Terrain)