Front View Camera Replacement

Callout	Component Name
Preliminary Procedure Remove the windshield multifunction sensor mounting bracket cover. Windshield Multifunction Sensor Mount Bracket Cover Replacement
1	Front View Camera NOTE: Ensure the front view camera is properly installed to the bracket or the camera can not be programmed. Procedure Using a suitable plastic tool, insert the tool between the edge of the front view camera retainers, turn the tool to release the retainers and the camera and rotate downward. Disconnect the electrical connector. Install the front view camera into the bottom of the bracket, then push front view camera up snapping into the bracket retainers. After replacement of the front view camera, program the front view camera. Control Module References

Callout

Component Name

Preliminary Procedure
Remove the windshield multifunction sensor mounting bracket cover. Windshield Multifunction Sensor Mount Bracket Cover Replacement

Front View Camera

NOTE:

Ensure the front view camera is properly installed to the bracket or the camera can not be programmed.

Procedure

Using a suitable plastic tool, insert the tool between the edge of the front view camera retainers, turn the tool to release the retainers and the camera and rotate downward.
Disconnect the electrical connector.
Install the front view camera into the bottom of the bracket, then push front view camera up snapping into the bracket retainers.
After replacement of the front view camera, program the front view camera. Control Module References