Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2018 >> Canyon SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery
    GM3807220Courtesy of GENERAL MOTORS COMPANY
  1. Install the battery. (1)
    2. Fig 2: Hold Down Retainer
    GM4565928Courtesy of GENERAL MOTORS COMPANY
  2. Install Battery Hold Down Retainer (2)
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install Battery Hold Down Retainer Rod (1) and tighten 22 N.m (16 lb ft)
    4. Fig 3: Battery Hold Down Retainer And Retainer Nut
    GM4565922Courtesy of GENERAL MOTORS COMPANY
  4. Install Battery Hold Down Retainer (2)
  5. Install Battery Hold Down Retainer Nut (1) and tighten 22 N.m (16 lb ft)
    6. Fig 4: Battery Positive Post Clamp Nut And Retaining Tabs
    GM4565911Courtesy of GENERAL MOTORS COMPANY
  6. Install Front Compartment Fuse Block (3)
  7. Engage the retaining tabs. (2)
  8. Install Battery Positive Post Clamp Nut (1) and tighten 4.5 N.m (40 lb in)
    9. Fig 5: Battery Positive Cable And Battery Fuse Block Cover
    GM4565898Courtesy of GENERAL MOTORS COMPANY
  9. Install Battery Positive Cable (1)
  10. Install Front Compartment Fuse Block Cable Nut (2) and tighten 15 N.m (11 lb ft)
  11. Close the battery fuse block cover.(3)
  12. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection .
scientia non olet · About Mike's Workshop Manuals