Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2018 >> Acadia SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 321 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> DTC P100C or P100D: Battery Sensor Module >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2017 GMC Acadia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify DTC P100C or P100D is not set.
    • If the DTC is set 
    1. Replace the B110 Battery Sensor Module
    • If the DTC is not set 
  3. All OK
scientia non olet · About Mike's Workshop Manuals