Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2018 >> Acadia Denali, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L (LGX) - Repair Instructions >> Repair Instructions >> Oil Pump Flow Control Solenoid Valve Harness Replacement >> Installation Procedure

Installation Procedure

  1. GM4848114

    Guide the oil pump flow control solenoid valve harness through the hole in the engine block and seat the harness connector (1).

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the oil pump flow control solenoid valve harness bolt (1) and tighten to 15 N.m (11 lb ft).
  3. GM4848113

    Connect the engine wiring harness electrical connector (1) to the oil pump flow control solenoid valve harness connector.

  4. GM4848112

    Install the oil pump flow control solenoid valve harness (1) to the crankshaft oil deflector retainers (2).

  5. GM4848111

    Install the oil pump flow control solenoid valve harness (2) to the retainer (3).

  6. Connect the oil pump flow control solenoid valve harness electrical connector (1) to the oil pump flow control solenoid valve.
  7. Oil Pan - Install - Oil Pan Replacement (AWD)Oil Pan Replacement (FWD)
scientia non olet · About Mike's Workshop Manuals