|
Preliminary Procedures
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
- Remove the intake manifold. Refer to Intake Manifold Replacement
.
- Remove the fuel feed intermediate pipe. Refer to Fuel Feed Intermediate Pipe Replacement .
|
| 1 |
Fuel Injection Fuel Rail Fastener (Qty: 4) Tighten 25 N.m (18 lb ft) |
| 2 |
Fuel Injection Fuel Rail Procedure
- Disconnect the electrical connector.
- Remove the fuel rail and injectors as an assembly. Refer to Fuel Rail and Injectors Removal
.
- It is necessary to rebuild the fuel injectors. Refer to Fuel Rail and Injectors Cleaning and Inspection (LAF, LEA, or LUK)
.
- Install the fuel rail and injectors as an assembly. Refer to Fuel Rail and Injectors Installation
.
|