Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2017 >> Canyon SL >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Replacement (LGZ) >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection 
    2. Fig 1: Air Cleaner Outlet Duct
    GM4565128Courtesy of GENERAL MOTORS COMPANY
  2. Remove Air Cleaner Outlet Duct (1)Air Cleaner Outlet Duct Replacement
  3. Remove the drive belt from the generator pulley. Drive Belt Replacement
    4. Fig 2: Underbody Splash Shield (with ZR2)
    GM4565133Courtesy of GENERAL MOTORS COMPANY
  4. Remove Underbody Splash Shield (2) Underbody Splash Shield Replacement (without ZR2)Underbody Splash Shield Replacement (with ZR2)
    5. Fig 3: Generator Terminal Protective Boot, Generator Nut And Generator Cable
    GM4565663Courtesy of GENERAL MOTORS COMPANY
  5. Reposition away Generator Terminal Protective Boot (1)
  6. Remove Generator Nut (2)
  7. Remove Generator Cable (3)
  8. Disconnect Electrical Connector (4)
    9. Fig 4: Generator And Bolt
    GM4565670Courtesy of GENERAL MOTORS COMPANY
  9. Remove Generator Bolt (1)
  10. Remove Generator Bolt (2)
  11. Remove Generator (3)
scientia non olet · About Mike's Workshop Manuals