Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2017 >> Acadia SL >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System >> Repair Instructions >> Front Suspension 4 Corner Leveling System Position Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
    2. Fig 1: Front Leveling System Position Sensor Harness Clip And Front Compartment Splash Shield
    GM4408993Courtesy of GENERAL MOTORS COMPANY
  2. Separate the front leveling system position sensor harness clip (1) from the front compartment splash shield (2).
    3. Fig 2: Front Leveling System Position Sensor And Electrical Connector
    GM4317797Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the electrical connector (1) from the front leveling system position sensor (2).
    4. Fig 3: Link Rod And Leveling System Position Sensor
    GM4317878Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the link rod (1) from the leveling system position sensor (2).
    5. Fig 4: Leveling System Position Sensor Bracket Nut
    GM4317900Courtesy of GENERAL MOTORS COMPANY
  5. Remove the leveling system position sensor bracket nut (1).
    6. Fig 5: Front Leveling System Position Sensor And Bracket
    GM4317910Courtesy of GENERAL MOTORS COMPANY
  6. Remove the front leveling system position sensor and bracket (1) from the vehicle.
scientia non olet · About Mike's Workshop Manuals