Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2017 >> Acadia SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.5L (LCV) - DTC P0010 To DTC P0366 >> Diagnostic Information and Procedures >> DTC P00F4-P00F6: Intake Air Humidity Sensor >> Circuit/System Description

Circuit/System Description

The sensors listed below are integrated within the Multifunction Intake Air sensor:

The IAT sensor 2 produces a frequency signal, based on the inlet air temperature, which is equal to the humidity present within the sensor bore. The signal varies with inlet air temperature and is displayed by the scan tool as °C (°F) and Hertz (Hz) and the relative humidity is displayed in percent (%). The ECM supplies a regulated voltage to the signal circuit. The signal circuit is shared by the IAT sensor 2 and the intake air humidity sensor. Ignition voltage and ground circuits are also supplied to the multifunction intake air sensor's internal circuits for these sensors:

scientia non olet · About Mike's Workshop Manuals