Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2016 >> Canyon SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Lighting System) >> Repair Instructions >> Fog Lamp Aiming >> Preparation Procedure

Preparation Procedure

WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Horizontal aim is not adjustable on this vehicle. Vertical aim is done by an adjusting allen head screw located through the front wheelhouse liner. Prior to aiming the fog lamps, perform the following steps

  1. Completely assemble all of the components on the vehicle.
  2. Place the vehicle on a level surface.
  3. Stop all unnecessary operations or work that could affect the ride height of the vehicle.
  4. Close the doors and verify that the luggage compartment is empty.
  5. Stabilize the suspension by rocking the vehicle sideways.
  6. Ensure that the fuel level is full.
  7. Ensure that the tires are inflated to the proper pressure.
  8. Ensure that the driver or a similar weight, approximately 75 kg (165 lb), is in the vehicle driver seat.
scientia non olet · About Mike's Workshop Manuals