Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2015 >> Terrain SL, Gas >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Replacement (LFX) >> Installation Procedure

Installation Procedure

    Fig 1: Starter Motor And Bolts
    GM2201749Courtesy of GENERAL MOTORS COMPANY
  1. Install the starter motor (2).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the starter motor mounting bolts. Tighten to 50 N.m (37 lb ft).
    3. Fig 2: View Of Starter Solenoid, Engine Harness Connector & Battery Positive Nut
    GM2196014Courtesy of GENERAL MOTORS COMPANY
  3. Install the battery positive cable and engine harness connector to the starter. Tighten the battery positive cable nut (1) to 13 N.m (115 lb in).
  4. Install the engine harness connector to the starter solenoid.
    5. Fig 3: View Of Starter & Heat Shield
    GM2196015Courtesy of GENERAL MOTORS COMPANY
  5. Install the starter heat shield (2) and tighten the bolt (1) to 5 N.m (44 lb in).
  6. Connect the knock sensor connector.
  7. Install and connect the bank 1 sensor 2 oxygen sensor.
scientia non olet · About Mike's Workshop Manuals