Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2015 >> Terrain SL, Gas >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Replacement (LEA) >> Installation Procedure

Installation Procedure

    Fig 1: View Of Starter Motor
    GM2102330Courtesy of GENERAL MOTORS COMPANY
  1. Position the starter (1) to the engine.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the starter bolts (2) and tighten to 50 N.m (37 lb ft).
    3. Fig 2: View Of Starter Motor, Bolts & Cable
    GM2102329Courtesy of GENERAL MOTORS COMPANY
  3. Install the starter solenoid wire terminal (2) to the starter.
  4. Install the positive battery cable terminal (3) to the starter Ensure that the anti-rotational tab is correctly located into the indexing slot.
  5. Install the starter solenoid terminal nut (4) and tighten to 10 N.m (89 lb in).
  6. Connect the engine harness connector (1) to the starter.
  7. Install the power vacuum brake booster pump. Refer to Power Brake Booster Pump Replacement
  8. Lower the vehicle.
  9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About Mike's Workshop Manuals