Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2014 >> Terrain SLT, 4D Utility >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Front Suspension System) >> Repair Instructions >> Strut Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Terrain and 2010 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air inlet screen. Refer to Air Inlet Screen Replacement (Equinox) or Air Inlet Screen Replacement (Terrain)
    2. Fig 1: Upper Strut Mount Bolts
    GM1467198Courtesy of GENERAL MOTORS CORP.
  2. Remove the 3 upper strut mount bolts.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Remove the wheel and tire assembly. Refer to Tire and Wheel Removal and Installation .
  5. Remove the brake hose bracket from the front strut. Refer to Front Brake Hose Replacement .
  6. Remove the stabilizer link from the front strut. Refer to Stabilizer Shaft Link Replacement .
    7. Fig 2: Identifying Steering Knuckle To Strut Bolts & Nuts
    GM1826249Courtesy of GENERAL MOTORS CORP.
  7. Remove the lower strut bolts and nuts.
  8. Remove the strut assembly from the vehicle.
scientia non olet · About Mike's Workshop Manuals