Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2014 >> Terrain SLT, 4D Utility >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Disc Brake System) >> Repair Instructions >> Front Brake Shield Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2012 GMC Terrain and 2012 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Refer to Brake Dust Warning .

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the front wheel drive shaft nut. Refer to Front Wheel Drive Shaft Replacement .
  4. Remove the front brake rotor. Refer to Front Brake Rotor Replacement .
  5. Remove the front wheel bearing and hub assembly. Refer to Front Wheel Bearing and Hub Replacement .
  6. Fig 1: Front Brake Shield
    GM2249488Courtesy of GENERAL MOTORS COMPANY
  7. Remove the front brake shield (1).