Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2013 >> Yukon Base, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - Repair Instructions >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement (2500 Series) >> Removal Procedure

Removal Procedure

IMPORTANT:

Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to avoid possible fuel and/or EVAP system contamination.

    Fig 1: View Of Fuel Tank Pressure Sensor (2500)
    GM1705812Courtesy of GENERAL MOTORS COMPANY
  1. Remove the intermediate fuel and evaporative emission (EVAP) lines.
  2. Gently pry straight up, in order to remove the fuel pressure sensor.
scientia non olet · About Mike's Workshop Manuals