Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specifications | |
|---|---|---|
| Metric | English | |
| Accelerator Pedal Bolt | 9 N.m | 80 lb in |
| Air Cleaner Housing Screw | 3 N.m | 27 lb in |
| Air Cleaner Outlet Duct Clamp | 4 N.m | 35 lb in |
| Camshaft Position (CMP) Sensor Wire Harness Bolt | 12 N.m | 106 lb in |
| Crankshaft Position (CKP) Sensor Bolt | 25 N.m | 18 lb ft |
| Engine Coolant Temperature (ECT) Sensor | 20 N.m | 15 lb ft |
| Engine Wiring Harness Clip to Generator Bolt | 9 N.m | 80 lb in |
| Engine Wiring Harness Bracket Nut | 5 N.m | 44 lb in |
| Evaporative Emission (EVAP) Canister Nut | 20 N.m | 15 lb ft |
| Fuel/Evaporative Emission (EVAP) Line Bracket Bolt | 9 N.m | 80 lb in |
| Fuel/Evaporative Emission (EVAP) Line Clip Nut | 20 N.m | 15 lb ft |
| Fuel Pipe Bracket to Bellhousing Stud Nut | 25 N.m | 18 lb ft |
| Fuel Pressure Sensor | 15 N.m | 11 lb ft |
| Fuel Pump Flow Control Module Bolt | 9 N.m | 80 lb in |
| Fuel Rail Bolt | 10 N.m | 89 lb in |
| Fuel Rail Crossover Pipe Retainer Screw | 3.8 N.m | 34 lb in |
| Fuel Tank Fill Pipe Ground Wire Bolt | 9 N.m | 80 lb in |
| Fuel Tank Filler Housing to Body Screw | 2.3 N.m | 20 lb in |
| Fuel Tank Filler Housing to Fuel Tank Fill Pipe Bolt | 2.3 N.m | 20 lb in |
| Fuel Tank Fill Clamp | 4 N.m | 35 lb in |
| Fuel Tank Shield Bolt- Cab Chassis | 28 N.m | 21 lb ft |
| Fuel Tank Shield Bolt- Pickup | 12 N.m | 106 lb in |
| Fuel Tank Strap Bolt | 40 N.m | 30 lb ft |
| Heated Oxygen Sensor (HO2S) | 42 N.m | 31 lb ft |
| Ignition Coil Bolt | 10 N.m | 89 lb in |
| Knock Sensor (KS) Bolt | 25 N.m | 18 lb ft |
| Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Bolt | 1.5 N.m | 13 lb in |
| Negative Battery Cable Stud | 25 N.m | 18 lb ft |
| Spare Tire Hoist Crossmember Bolt | 50 N.m | 37 lb ft |
| Spark Plug | 15 N.m | 11 lb ft |
| Throttle Body Bolt/Nut | 10 N.m | 89 lb in |