Intake Air Temperature (IAT) Sensor 2 Replacement
NOTE:
Conflicting OE information provides separate IAT sensor 2 replacement procedure. Wiring shows it built into MAF sensor. This may be in error and just a carryover from previous design.
Intake Air Temperature (IAT) Sensor 2 Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the engine cover. Refer to Engine Cover Replacement . |
|
| 1 | Intake Air Temperature Sensor 2
CAUTION:
Refer to Fastener Caution . Procedure Disconnect the electrical connector. Tighten 25 N.m (18 lb ft) |