Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2011 >> Yukon Hybrid, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - Hybrid (LZ1) - Repair Instructions >> Repair Instructions >> Barometric Pressure Sensor Replacement

Barometric Pressure Sensor Replacement

Fig 1: Barometric Pressure Sensor
GM1999123Courtesy of GENERAL MOTORS CORP.
Barometric Pressure Sensor Replacement

Callout Component Name
Preliminary Procedure 
Remove the upper intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
1 Bolt
CAUTION:

Refer to Fastener Caution .


Tighten 
10 N.m (89 lb in)
2 Retainer
3 Barometric Pressure Sensor

Procedure

  1. Disconnect the BARO sensor harness connector.
  2. Remove the BARO sensor from the intake manifold.
scientia non olet · About Mike's Workshop Manuals